Use Tutorials Video: * Check
The disadvantage of this test indicates that some models cannot be tested when the resolution of this tester is above 3K. Ltn133yl02 / 03 / 04 / 05 / 06 can not be tested normally, so only self-test line can be used. Other LCDs with resolution above 3K do not promise to test normally. The resolution below 3K is no problem.
1. This EDP tester has intelligent screen parameter configuration function, 6-bit screen uses 01, 8-bit screen uses 02. In general, the screen with 1920 * 1080 resolution and above uses 02, and the screen with 1920 * 1080 resolution and below uses 01. When you don't know the resolution, you can try 02 first. In all EDP screens, about 10% of the screens can not match the intelligent screen parameters, so it is necessary to use the accurate screen parameter number.
2. For the configuration of accurate screen reference number, first search the LCD screen model to be tested in Baidu to determine the screen type and resolution. Then query the corresponding number. Each resolution is divided into 6-digit and 8-digit, with a total of 6 numbers. It is generally recommended to use 8-digit screen reference number first.
3 EDP screen is usually 30 pins with 0.5 spacing. The standard line of the screen tester can measure 80% EDP screen with 1920 * 1080 resolution and below, which is different from LVDS screen. The screen with 2K resolution or above and the screen line with standard configuration can not be tested normally needs to be made by hand, and the LCD screen needs to be provided at the same time. Generally, it is connected to ports a, C and D of the tester. When the screen is bright, but the screen is flashing or black, port B, C and D are used. If some manual lines do not have port C, only port B and D are needed. The standard line of EDP screen whose screen model starts with vvx can't be applied, so it must be done manually again. Au screen containing b116htn, b133htn, b140htn and b156htn can be normally displayed with B, C and D. Qimei's n133hse-ea3 / EB3 can be displayed normally only with B, C and D.
4. If a, C, D or B, C, D glass signal image display is normal but the backlight is not bright, it means that the screen does not have its own backlight boost module, and it needs to do the screen connecting line and external constant current board manually.
No customer reviews for the moment.
16 other products in the same category
TV160 LVDS Conversion Link Board for 7th 4K 51Pin
TV160 LVDS Conversion Link Board for 7th 4K 51Pin
TV18 Test Tool LED LCD Screen Tester Support 784Voltage Transformer Board 14 LVDS
T-V18 Test Tool LED LCD Screen Tester Support 7-84+Voltage Transformer Board 14 LVDS
UNIT UT58E LCR Meter Digital Multimeters w Frequency Temperature test Ammeter
UNI-T UT58E LCR Meter Digital Multimeters w/ Frequency Temperature test Ammeter
1 Pair 1000V 20A Universal Digital Multimeter Multi Meter Test Lead Probe Wire Pen Cable L1Y
1 Pair 1000V 20A Universal Digital Multimeter Multi Meter Test Lead Probe Wire Pen Cable L1Y
Hantek PP150 Oscilloscope Probe Accessories with Alligator Clip 1X 10X 100MHz
Hantek PP-150 Oscilloscope Probe Accessories with Alligator Clip 1X 10X 100MHz
TV1604 Converter VBYONE to LVDS Converter4K Mainboard maintenance test tool
TV160-4 Converter (V-BY-ONE to LVDS Converter)-4K Mainboard maintenance test tool
TV1608 4KVbyone 2KLVDS Screen Tester
TV160-8 4K-Vbyone 2K-LVDS Screen Tester
UNIT UT612 LCR Meter USB Interface 20000 Counts Inductance Freq Test Deviation
UNI-T UT612 LCR Meter USB Interface 20000 Counts Inductance Freq Test Deviation
Mechanic VC04 VCC power supply short circuit delector
Mechanic VC04 VCC power supply short circuit delector
ZOTEK ZTM1 Automatic Manual Digital Large LCD Screen Display AC DC Multimeter
ZOTEK ZT-M1 Automatic Manual Digital Large LCD Screen Display AC DC Multimeter
QKAK7 Laptop Keyboard Tester Testing Device Machine Tool USB Interface
QK-AK7 Laptop Keyboard Tester Testing Device Machine Tool USB Interface