
OTS2012701 Adattatore programmatore SOP20DIP20 Socket 200mil
OTS-20-1.27-01 Adattatore programmatore SOP20-DIP20 Socket (200mil)
XELTEK SuperPro 6100N (so not 6100)Universal Programmer 100,000+ devices supported
Login to Download: Download software
Note: DIP48 adaptor(DX0001) are no longer standard with SP6100N and SP6104N, From 1 June 2020 .
SuperPro 6100N is a cost-effective, reliable, and high-speed universal chip programmer. It is designed to communicate using USB 2.0 port for development requirement and can also work in standalone mode (without connecting to a PC) for production requirement. It has the largest device support count in the programming industry with 144 pin drivers to support high pin count chips.
Application and target customers: Programming houses, electronic repair, car repair shops, forensic and data recovery companies, medical devices, requirement for larger device support.
Advantages of SuperPro 6100N
Ultra Fast Programming Speed SuperPro 6100 is designed with high programming speed in mind. Our semiconductor manufacturer approved algorithms, precision and clean signals guarantee high programming yield. Special design was made to eliminate overshoot and ground bounce. Algorithms are performed with state machine architecture constructed with FPGA to achieve a ultra-high programming speed.
Largest Device Support Located in Silicon Valley, we keep good relationships with many major IC companies that are important for us to continuously support new devices. SuperPro 6100 currently supports more than 100,000 devices, which is the largest device library in the programming industry. Requested device algorithms can be added within a week - average lead time from other manufacturers is over two months.
Built-in 144 Pin Driver Most universal IC programmers are designed with 48 pin driver or less. Programmers with a 48 pin driver design need special adapters (pin mapping) to accommodate devices with more than 48 pins. Bottom boards needed for pin mapping can quickly increase production costs just to support one package type. SuperPro 6100N is equipped with a built-in universal 144 pin driver to accommodate large pin count devices. One universal adapter accommodates all devices with the same package type.
Stand-Alone Mode Unlike many other universal programmers in the industry, SuperPro 6100N is capable of operating in stand-alone mode. Under stand-alone mode, SuperPro 6100 can be operated by an inexperienced operator with minimal training. Once the project file is selected, the operator only has to insert a blank chip and remove the programmed chip upon beeping. This ensures a minimal chance that an operator will make a mistake. Users can also use clusters of stand-alone programmers to achieve high volume production. Last but not the least, stand-alone mode saves both the cost of PC and labor of the trained and qualified operator.
Tester for Logic Devices and SRAMs In addition to having a large device library, SuperPro 6100 programmer is also designed for IC testing of varioudevices such as TTL, CMOS Logic (74/4000 series), and SRAM memory devices.
Hardware and Electrical Specifications
Devices supported
EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration PROM, FLASH memory (NOR), BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, Microcontroller, MCU
Package types supported
DIP, SDIP, PLCC, JLCC, PGA, LGA, SOIC, SOJ, SOT, QFP, TQFP, PQFP, VQFP, MQFP, LQFP, TSOP, SOP, TSOPII, PSOP, SSOP, TSSOP, SON, EBGA, FBGA, FTBGA, VFBGA, BGA, CSP, SCSP, QFN, HVQFN etc.
PC interface
USB 2.0
Stand-alone memory
Compact FLASH Card
Power supply
AC Adapter: Input AC 100V- 240V; Output: 12V/1.5A
Dimensions
Main unit: 148(L) x 216(W) x 94(H) mm
Package: 301(L) x 252(W) x 145(H) mm
Weight
Main unit: Weight 3.5 lbs (1.6 Kg)
Package: Weight 6.2 lbs (2.8Kg)
Expanded Features
Operate multiple units to construct a concurrent multi-programming system. Cluster 1-15 units for flexible volume production.
Support devices with Vcc from 1.2V - 5V.
Support files up to 256 GB.
Over-current and over-voltage protection for safety of the chip and programmer hardware.
Only IC manufacturer approved programming algorithms used for high reliability.
Vcc verification (at +5% ~ -5% and +10% ~ -10%) enhances programming reliability.
Ac Acessories:
Main unit with a DIP48 adaptor, AC adaptor, USB2.0 cable, user manual, software CD, register card
Optional accessories: adaptor in varies packages, CF card for stand-alone operation.
Nessuna opinione al momento
OTS-20-1.27-01 Adattatore programmatore SOP20-DIP20 Socket (200mil)
TNM5000 USB veloce ISP EEPROM programmatore universale + 20 adattatore NAND flash
Programmatore XGecu T56 EMMC-NAND FLASH + 48 adattatore Super combinazione
ELM327 Strumento di adattatore dell\'automobile dell\'interfaccia OBD2 di interfaccia di Bluetooth per TORQUE ANDROID
EZP2019+ USB Programmer Support 24/25/26/93 EEPROM Flash Bios win8 32/64bit Adattatore Presa
Prese del programmatore dell\'adattatore SOP a PLCC 10 per l\'TL866 RT809 H
Programmatore universale XGecu T56 + 6 adattatori Codice EDID
Adattatore TSOP56/48/40/32 per programmatore XGecu T56
TL866II PLUS programmatore EEPROM supporto NAND Flash AVR MCU GAL PIC SPI 9+1 adattatore estrattore clip
Adattatore universale di presa IC SSOP20 a DIP20 / SSOP16 a DIP16 / SSOP14 (220mil)
Mini ST-Link V2 stlink Emulatore Downloader STM8 STM32 con coperchio + cavo Dupont
RT-BGA169-01 Sedile EMMC153 EMMC169 Adattatore + Telaio di limite per RT809H Programmatore
DX1032-1 per XELTEK SuperPro 6100N
Freescale BDM USBDM 8/16/32 bit 3in1 smart car driver
Iprog+ Programmatore V85 Supporto IMMO +Mileage +Airbag fino al 2019
Programmatore ECU KTM V1.20 (32in1)