
Adattatore DX30211 per XELTEK SuperPro 6100N
Adattatore DX3021-1 per XELTEK SuperPro 6100N
XELTEK SuperPro 6100N (so not 6100)Universal Programmer 100,000+ devices supported
Login to Download: Download software
Note: DIP48 adaptor(DX0001) are no longer standard with SP6100N and SP6104N, From 1 June 2020 .
SuperPro 6100N is a cost-effective, reliable, and high-speed universal chip programmer. It is designed to communicate using USB 2.0 port for development requirement and can also work in standalone mode (without connecting to a PC) for production requirement. It has the largest device support count in the programming industry with 144 pin drivers to support high pin count chips.
Application and target customers: Programming houses, electronic repair, car repair shops, forensic and data recovery companies, medical devices, requirement for larger device support.
Advantages of SuperPro 6100N
Ultra Fast Programming Speed SuperPro 6100 is designed with high programming speed in mind. Our semiconductor manufacturer approved algorithms, precision and clean signals guarantee high programming yield. Special design was made to eliminate overshoot and ground bounce. Algorithms are performed with state machine architecture constructed with FPGA to achieve a ultra-high programming speed.
Largest Device Support Located in Silicon Valley, we keep good relationships with many major IC companies that are important for us to continuously support new devices. SuperPro 6100 currently supports more than 100,000 devices, which is the largest device library in the programming industry. Requested device algorithms can be added within a week - average lead time from other manufacturers is over two months.
Built-in 144 Pin Driver Most universal IC programmers are designed with 48 pin driver or less. Programmers with a 48 pin driver design need special adapters (pin mapping) to accommodate devices with more than 48 pins. Bottom boards needed for pin mapping can quickly increase production costs just to support one package type. SuperPro 6100N is equipped with a built-in universal 144 pin driver to accommodate large pin count devices. One universal adapter accommodates all devices with the same package type.
Stand-Alone Mode Unlike many other universal programmers in the industry, SuperPro 6100N is capable of operating in stand-alone mode. Under stand-alone mode, SuperPro 6100 can be operated by an inexperienced operator with minimal training. Once the project file is selected, the operator only has to insert a blank chip and remove the programmed chip upon beeping. This ensures a minimal chance that an operator will make a mistake. Users can also use clusters of stand-alone programmers to achieve high volume production. Last but not the least, stand-alone mode saves both the cost of PC and labor of the trained and qualified operator.
Tester for Logic Devices and SRAMs In addition to having a large device library, SuperPro 6100 programmer is also designed for IC testing of varioudevices such as TTL, CMOS Logic (74/4000 series), and SRAM memory devices.
Hardware and Electrical Specifications
Devices supported
EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration PROM, FLASH memory (NOR), BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, Microcontroller, MCU
Package types supported
DIP, SDIP, PLCC, JLCC, PGA, LGA, SOIC, SOJ, SOT, QFP, TQFP, PQFP, VQFP, MQFP, LQFP, TSOP, SOP, TSOPII, PSOP, SSOP, TSSOP, SON, EBGA, FBGA, FTBGA, VFBGA, BGA, CSP, SCSP, QFN, HVQFN etc.
PC interface
USB 2.0
Stand-alone memory
Compact FLASH Card
Power supply
AC Adapter: Input AC 100V- 240V; Output: 12V/1.5A
Dimensions
Main unit: 148(L) x 216(W) x 94(H) mm
Package: 301(L) x 252(W) x 145(H) mm
Weight
Main unit: Weight 3.5 lbs (1.6 Kg)
Package: Weight 6.2 lbs (2.8Kg)
Expanded Features
Operate multiple units to construct a concurrent multi-programming system. Cluster 1-15 units for flexible volume production.
Support devices with Vcc from 1.2V - 5V.
Support files up to 256 GB.
Over-current and over-voltage protection for safety of the chip and programmer hardware.
Only IC manufacturer approved programming algorithms used for high reliability.
Vcc verification (at +5% ~ -5% and +10% ~ -10%) enhances programming reliability.
Ac Acessories:
Main unit with a DIP48 adaptor, AC adaptor, USB2.0 cable, user manual, software CD, register card
Optional accessories: adaptor in varies packages, CF card for stand-alone operation.
Nessuna opinione al momento
Adattatore DX3021-1 per XELTEK SuperPro 6100N
DX3023 ADAPTER PER XELTEK SUPERPRO 6100N
Adattatore DX3014 per XELTEK SuperPro 6100N
RT-BGA64-01 cornice 11 * 13mm adattatore EMMC speciale per RT809H Programmatore
QFP64 a DIP64 CHIP PROGRAMMER SOCKET QFP64-0.5-REV2 Tipologia Presa adattatore U
Adattatore TSOP56-0.5-TPO1NT TSOP56-DIP56
TNM5000 USB veloce ISP EEPROM programmatore universale + TSOP48 TSOP56 set adattatore IC socket
Adattatore programmatore QFN8 a DIP8 Prese DFN8 MLF8 QFN8 3*2 perno centrale
XELTEK SuperPro 6100N Universal IC Chip Device Programmer NEWEST versione + 28 Adattatori Codice EDID
Telaio di limite RT-BGA63-01 V2.0 13*10.5mm per RT809H Programmatore
OTS-28-1.27-04 Adattatore programmatore SOP28-DIP28 Socket (300mil)
Programmatore RT809F Tutti gli adattatori SOP8 IC Clip Lettore LCD scheda madre + PEB-1 + EDID + ISP-DuPont-Heade
LEAP LER-121A EPROM Eraser con Timer per programmi ATMEL Microcontroller, PI
Adattatore DX5046 BGA63 per XELTEK SuperPro 6100N
RENESAS EZ-CUBE strumento di sviluppo dispositivo artificiale rl78 r8c3x lx 78k0r 78k 0 v850jx3
Telaio di limite 10.5*13.5mm per TL86 PLUS ProMan Nandpro Programmatore BGA63 presa adattatore