• Show Sidebar

There are 340 products.

Active filters

  • Categories: Bios Chip Programming
  • Categories: Car Service Equipment
  • Categories: Multimeter, Test Tools
  • Categories: Pin Holder
  • Categories: Programmer
wishlist
Compare
Quickview

2K 4K EDP Screen Tester eDP signal universal testing instrument 74 Kinds test screen tools

Use Tutorials Video: * Check

The disadvantage of this test indicates that some models cannot be tested when the resolution of this tester is above 3K. Ltn133yl02 / 03 / 04 / 05 / 06 can not be tested normally, so only self-test line can be used. Other LCDs with resolution above 3K do not promise to test normally. The resolution below 3K is no problem.

1. This EDP tester has intelligent screen parameter configuration function, 6-bit screen uses 01, 8-bit screen uses 02. In general, the screen with 1920 * 1080 resolution and above uses 02, and the screen with 1920 * 1080 resolution and below uses 01. When you don't know the resolution, you can try 02 first. In all EDP screens, about 10% of the screens can not match the intelligent screen parameters, so it is necessary to use the accurate screen parameter number.

2. For the configuration of accurate screen reference number, first search the LCD screen model to be tested in Baidu to determine the screen type and resolution. Then query the corresponding number. Each resolution is divided into 6-digit and 8-digit, with a total of 6 numbers. It is generally recommended to use 8-digit screen reference number first.

3 EDP screen is usually 30 pins with 0.5 spacing. The standard line of the screen tester can measure 80% EDP screen with 1920 * 1080 resolution and below, which is different from LVDS screen. The screen with 2K resolution or above and the screen line with standard configuration can not be tested normally needs to be made by hand, and the LCD screen needs to be provided at the same time. Generally, it is connected to ports a, C and D of the tester. When the screen is bright, but the screen is flashing or black, port B, C and D are used. If some manual lines do not have port C, only port B and D are needed. The standard line of EDP screen whose screen model starts with vvx can't be applied, so it must be done manually again. Au screen containing b116htn, b133htn, b140htn and b156htn can be normally displayed with B, C and D. Qimei's n133hse-ea3 / EB3 can be displayed normally only with B, C and D.

4. If a, C, D or B, C, D glass signal image display is normal but the backlight is not bright, it means that the screen does not have its own backlight boost module, and it needs to do the screen connecting line and external constant current board manually.

CH004231
€317.02

2K 4K EDP Screen Tester eDP signal universal testing instrument 74 Kinds test screen tools

  • -20%
wishlist
Compare
Quickview

A1278 EMC 2554 Bios Chip EFI Firmware 820-3115 Mid2012 13 Core i7 I73520M MD102LLA

PO000079
€18.00 €22.50

A1278 EMC 2554 Bios EFI Firmware 820-3115 Mid-2012 13 Core i7 I7-3520M MD102LL/A

wishlist
Compare
Quickview

ZOTEK ZT203 6000 Counts Pentype Digital Multimeter True RMS Auto Range DCAC Voltage Meter Voltmeter with Backlight

ZOTEK ZT203 6000 Counts Pen-type Digital Multimeter True RMS Auto Range DC/AC Voltage Meter Voltmeter with Backlight

Description:

This is battery-powered, true RMS, auto-ranging, pen-type digital multimeter with 6000

counts backlight LCD display.

Five functional buttons instead of the traditional rotary switch enable one-hand operation.

This product is made of high quality material and durable, which can prevent breakage.

Features:

5 functional buttons: instead of the traditional rotary switch, 5 buttons can make you

measurements more convenient and efficient.

True RMS: The RMS/DC transform avoids the influence of voltage waveform distortion can test high accuracy.

LCD Display: 6000 counts digital LCD display offers large test rang as well as clear readings.

7 Test Modes: used to test DC & AC voltage, capacitance, resistance, frequency, continuity,

diode and NCV.

Humanized Design: it comes with auto power off, data hold, auto/manual range.

Specifications:

Material: Plastic

Display: LCD display with backlight

DC Voltage Range: 60mV/600mV/6V/60V/600V/1000V

AC Voltage Range: 60mV/600mV/6V/60V/600V/750V

Resistance Range: 600O/6kO/60kO/600kO/6MO/60MO

Capacitance Range: 9.999nF/99.99nF/999.9nF/9.999F/99.99F/999.9F/9.999mF

Frequency: 99.99Hz/999.9Hz/9.999kHz/99.99kHz/999.9kHz/9.999MHz

Diode: yes

Continuity: yes

NVC: yes

Maximum display: 6000

Automatic range/manual range: yes

True effective value: yes

Data retention: yes

Flashlight: yes

Low battery tip: yes

Automatic shutdown: yes

Relative value measurement: yes

Supply power: 2 x 1.5V AAA batteries (not included)

Item dimension:

Item Size: 20.2cm x 5.1cm x 3.4cm/7.6 x 2 x 1.3in

Item Weight: 114g/4oz

Package information:

Package Size: 23.2* 9 * 5.5cm / 9.1 * 3.5 * 2.7in

Package Weight: 267g/9.4oz

Gift box package

Package List:

1 x Digital Multimeter

1 x Pair of Test Leads

1 x Black soft case

1 x User Manual(English)

CH004292
€22.75

ZOTEK ZT203 6000 Counts Pen-type Digital Multimeter True RMS Auto Range DC/AC Voltage Meter Voltmeter with Backlight

  • -20%
wishlist
Compare
Quickview

A1425 EMC 2557 Bios Chip EFI Firmware 820-3462 Retina Late 2012 Core i7 I73520M ME116LLA

PO000081
€18.00 €22.50

A1425 EMC 2557 Bios EFI Firmware 820-3462 Retina Late 2012 Core i7 I7-3520M ME116LL/A

  • -20%
wishlist
Compare
Quickview

A1425 EMC 2672 Bios Chip EFI Firmware 820-3190 Retina Early 2013 Core i5 I53230M ME662LLA

PO000082
€18.00 €22.50

A1425 EMC 2672 Bios EFI Firmware 820-3190 Retina Early 2013 Core i5 I5-3230M ME662LL/A

  • -20%
wishlist
Compare
Quickview

A1425 EMC 2672 Bios Chip EFI Firmware 820-3190 Retina Early 2013 Core i7 I73540M BTOCTO

PO000083
€18.00 €22.50

A1425 EMC 2672 Bios EFI Firmware 820-3190 Retina Early 2013 Core i7 I7-3540M BTO/CTO

wishlist
Compare
Quickview

1 Pair 1000V 20A Universal Digital Multimeter Multi Meter Test Lead Probe Wire Pen Cable L1Y

More Similar Products

1 Pair 1000V 20A Universal Digital Multimeter Meter Probe Test Leads 3mm Pin Red + Black

Features :

100% brand new and high quality.

The anterior gold-plated design, in the test, the sensitivity of pens and higher and more accurate.

22mm Plug Insertion Depth.

Up to 20A / 1000V

Material: PVC and Alloy

Color: Black + Red

Package includeds :

1 x Pair of Digital Multimeter Meter Probe

CH004435
€2.70

1 Pair 1000V 20A Universal Digital Multimeter Multi Meter Test Lead Probe Wire Pen Cable L1Y

  • -20%
wishlist
Compare
Quickview

A1425 EMC 2672 Bios Chip EFI Firmware 820-3462 Retina Early 2013 Core i5 I53230M ME662LLA

PO000084
€18.00 €22.50

A1425 EMC 2672 Bios EFI Firmware 820-3462 Retina Early 2013 Core i5 I5-3230M ME662LL/A

2K 4K EDP Screen Tester eDP signal universal testing instrument 74 Kinds test screen tools

Use Tutorials Video: * Check

The disadvantage of this test indicates that some models cannot be tested when the resolution of this tester is above 3K. Ltn133yl02 / 03 / 04 / 05 / 06 can not be tested normally, so only self-test line can be used. Other LCDs with resolution above 3K do not promise to test normally. The resolution below 3K is no problem.

1. This EDP tester has intelligent screen parameter configuration function, 6-bit screen uses 01, 8-bit screen uses 02. In general, the screen with 1920 * 1080 resolution and above uses 02, and the screen with 1920 * 1080 resolution and below uses 01. When you don't know the resolution, you can try 02 first. In all EDP screens, about 10% of the screens can not match the intelligent screen parameters, so it is necessary to use the accurate screen parameter number.

2. For the configuration of accurate screen reference number, first search the LCD screen model to be tested in Baidu to determine the screen type and resolution. Then query the corresponding number. Each resolution is divided into 6-digit and 8-digit, with a total of 6 numbers. It is generally recommended to use 8-digit screen reference number first.

3 EDP screen is usually 30 pins with 0.5 spacing. The standard line of the screen tester can measure 80% EDP screen with 1920 * 1080 resolution and below, which is different from LVDS screen. The screen with 2K resolution or above and the screen line with standard configuration can not be tested normally needs to be made by hand, and the LCD screen needs to be provided at the same time. Generally, it is connected to ports a, C and D of the tester. When the screen is bright, but the screen is flashing or black, port B, C and D are used. If some manual lines do not have port C, only port B and D are needed. The standard line of EDP screen whose screen model starts with vvx can't be applied, so it must be done manually again. Au screen containing b116htn, b133htn, b140htn and b156htn can be normally displayed with B, C and D. Qimei's n133hse-ea3 / EB3 can be displayed normally only with B, C and D.

4. If a, C, D or B, C, D glass signal image display is normal but the backlight is not bright, it means that the screen does not have its own backlight boost module, and it needs to do the screen connecting line and external constant current board manually.

CH004231
€317.02

2K 4K EDP Screen Tester eDP signal universal testing instrument 74 Kinds test screen tools

wishlist
Compare
  • -20%

A1278 EMC 2554 Bios Chip EFI Firmware 820-3115 Mid2012 13 Core i7 I73520M MD102LLA

PO000079
€18.00 €22.50

A1278 EMC 2554 Bios EFI Firmware 820-3115 Mid-2012 13 Core i7 I7-3520M MD102LL/A

wishlist
Compare

ZOTEK ZT203 6000 Counts Pentype Digital Multimeter True RMS Auto Range DCAC Voltage Meter Voltmeter with Backlight

ZOTEK ZT203 6000 Counts Pen-type Digital Multimeter True RMS Auto Range DC/AC Voltage Meter Voltmeter with Backlight

Description:

This is battery-powered, true RMS, auto-ranging, pen-type digital multimeter with 6000

counts backlight LCD display.

Five functional buttons instead of the traditional rotary switch enable one-hand operation.

This product is made of high quality material and durable, which can prevent breakage.

Features:

5 functional buttons: instead of the traditional rotary switch, 5 buttons can make you

measurements more convenient and efficient.

True RMS: The RMS/DC transform avoids the influence of voltage waveform distortion can test high accuracy.

LCD Display: 6000 counts digital LCD display offers large test rang as well as clear readings.

7 Test Modes: used to test DC & AC voltage, capacitance, resistance, frequency, continuity,

diode and NCV.

Humanized Design: it comes with auto power off, data hold, auto/manual range.

Specifications:

Material: Plastic

Display: LCD display with backlight

DC Voltage Range: 60mV/600mV/6V/60V/600V/1000V

AC Voltage Range: 60mV/600mV/6V/60V/600V/750V

Resistance Range: 600O/6kO/60kO/600kO/6MO/60MO

Capacitance Range: 9.999nF/99.99nF/999.9nF/9.999F/99.99F/999.9F/9.999mF

Frequency: 99.99Hz/999.9Hz/9.999kHz/99.99kHz/999.9kHz/9.999MHz

Diode: yes

Continuity: yes

NVC: yes

Maximum display: 6000

Automatic range/manual range: yes

True effective value: yes

Data retention: yes

Flashlight: yes

Low battery tip: yes

Automatic shutdown: yes

Relative value measurement: yes

Supply power: 2 x 1.5V AAA batteries (not included)

Item dimension:

Item Size: 20.2cm x 5.1cm x 3.4cm/7.6 x 2 x 1.3in

Item Weight: 114g/4oz

Package information:

Package Size: 23.2* 9 * 5.5cm / 9.1 * 3.5 * 2.7in

Package Weight: 267g/9.4oz

Gift box package

Package List:

1 x Digital Multimeter

1 x Pair of Test Leads

1 x Black soft case

1 x User Manual(English)

CH004292
€22.75

ZOTEK ZT203 6000 Counts Pen-type Digital Multimeter True RMS Auto Range DC/AC Voltage Meter Voltmeter with Backlight

wishlist
Compare
  • -20%

A1425 EMC 2557 Bios Chip EFI Firmware 820-3462 Retina Late 2012 Core i7 I73520M ME116LLA

PO000081
€18.00 €22.50

A1425 EMC 2557 Bios EFI Firmware 820-3462 Retina Late 2012 Core i7 I7-3520M ME116LL/A

wishlist
Compare
  • -20%

A1425 EMC 2672 Bios Chip EFI Firmware 820-3190 Retina Early 2013 Core i5 I53230M ME662LLA

PO000082
€18.00 €22.50

A1425 EMC 2672 Bios EFI Firmware 820-3190 Retina Early 2013 Core i5 I5-3230M ME662LL/A

wishlist
Compare
  • -20%

A1425 EMC 2672 Bios Chip EFI Firmware 820-3190 Retina Early 2013 Core i7 I73540M BTOCTO

PO000083
€18.00 €22.50

A1425 EMC 2672 Bios EFI Firmware 820-3190 Retina Early 2013 Core i7 I7-3540M BTO/CTO

wishlist
Compare

1 Pair 1000V 20A Universal Digital Multimeter Multi Meter Test Lead Probe Wire Pen Cable L1Y

More Similar Products

1 Pair 1000V 20A Universal Digital Multimeter Meter Probe Test Leads 3mm Pin Red + Black

Features :

100% brand new and high quality.

The anterior gold-plated design, in the test, the sensitivity of pens and higher and more accurate.

22mm Plug Insertion Depth.

Up to 20A / 1000V

Material: PVC and Alloy

Color: Black + Red

Package includeds :

1 x Pair of Digital Multimeter Meter Probe

CH004435
€2.70

1 Pair 1000V 20A Universal Digital Multimeter Multi Meter Test Lead Probe Wire Pen Cable L1Y

wishlist
Compare
  • -20%

A1425 EMC 2672 Bios Chip EFI Firmware 820-3462 Retina Early 2013 Core i5 I53230M ME662LLA

PO000084
€18.00 €22.50

A1425 EMC 2672 Bios EFI Firmware 820-3462 Retina Early 2013 Core i5 I5-3230M ME662LL/A

wishlist
Compare
Back to top