
DX3101 Adapter for XELTEK SuperPro 6100N
DX3101 Adapter for XELTEK SuperPro 6100N
The use of programmer selftest command,to check if there is problem itself.
Selftest way I:
Step 1 : Input the SELFTEST in the Enter chip printing,click
Step 2 : Click ,look at the hint in the display area,selftest 0 means the test pass;
Step 3 : Install the NO.1 test board and the short port of VGA ISP(short circuit the 4pins and 11pins,12pins and 15pins);
Step 4 : Click ,check the hint in the software,it will hint Selftest 1,test pass;
Step 5 : Install the NO.2 Self Test Board;
Step 6 : Click ,check the hint in the software,it will hint Selftest 2, test pass;
Selftest way II :
Step 1 : When there is no chip on the locking seat,input the type of 25XX in Enter Chip Printing;
Step 2 : Click ,it will hint that there is no chip or the locking seat hasnt been impacted well,which is normal;
If it hints that there may be a pin empty solder;
Attention : In the case of that some users have no test board,as long as the selftest 0 and 25 chip test pass,the machine is normal.
If there is other hints when doing selftest 0,the way to deal with it could be as following:
The problem of connection with computer and the programmer,please step-by examine according to the hint of failure process;
Hardware trouble like pin electric leakage,problems inside the pins,VPP open circuit,GND open circuit,VPP short circuit,VCC short circuit,GND short circuit,VPP protection not shut off,which must be returned to factory to repair.
No customer reviews for the moment.
DX3101 Adapter for XELTEK SuperPro 6100N
48 pin Lock clasp Programmer for RT809H TNM5000 XELTEK 610P 611S 6100N BeeProg2
BeeProg2C Extremely fast universal USB interfaced programmer
XELTEK SuperPro 610P Universal Programmer with 16 Adapter EDID code
1.8V Conversion Block 25 series low voltage chip adapter Apple LCD Tablet PC BIOS
DX3077 Adapter for XELTEK SuperPro 6100N
DX4006 Adapter for XELTEK SuperPro 6100N
SA244 Adapter PLCC44/DIP44 for XELTEK SuperPro 610P 611S
DX0064 Adapter for XELTEK SuperPro 6100N
RT809F Programmer 8 Adapters SOP8 IC Clip Motherboard LCD Reader
ICSP RT809F ISP Programmer Programmer ICSP / serial / USB
DX3009 Adapter for XELTEK SuperPro 6100N
DX5074 Adapter for XELTEK SuperPro 6100N
OTS-16-03 Programmer Adapter SOP8-DIP8 Socket (150mil)
GX5239-T003-S4 ADAPTER FOR XELTEK SUPERPRO 7500