
Limit Frame RT BGA63 01 V20 13x10.5mm For RT809H Programmer
Limit Frame RT-BGA63-01 V2.0 13*10.5mm For RT809H Programmer
The use of programmer selftest command,to check if there is problem itself.
Selftest way I:
Step 1 : Input the SELFTEST in the Enter chip printing,click
Step 2 : Click ,look at the hint in the display area,selftest 0 means the test pass;
Step 3 : Install the NO.1 test board and the short port of VGA ISP(short circuit the 4pins and 11pins,12pins and 15pins);
Step 4 : Click ,check the hint in the software,it will hint Selftest 1,test pass;
Step 5 : Install the NO.2 Self Test Board;
Step 6 : Click ,check the hint in the software,it will hint Selftest 2, test pass;
Selftest way II :
Step 1 : When there is no chip on the locking seat,input the type of 25XX in Enter Chip Printing;
Step 2 : Click ,it will hint that there is no chip or the locking seat hasnt been impacted well,which is normal;
If it hints that there may be a pin empty solder;
Attention : In the case of that some users have no test board,as long as the selftest 0 and 25 chip test pass,the machine is normal.
If there is other hints when doing selftest 0,the way to deal with it could be as following:
The problem of connection with computer and the programmer,please step-by examine according to the hint of failure process;
Hardware trouble like pin electric leakage,problems inside the pins,VPP open circuit,GND open circuit,VPP short circuit,VCC short circuit,GND short circuit,VPP protection not shut off,which must be returned to factory to repair.
No customer reviews for the moment.
Limit Frame RT-BGA63-01 V2.0 13*10.5mm For RT809H Programmer
DX3043 Adapter for XELTEK SuperPro 6100N
EZP_XPro Programmer USB motherboard routing LCD BIOS SPI FLA
XGecu T56 Universal Programmer Support NAND/EMMC/MCU/ISP
XELTEK SuperPro 610P Universal Programmer with 28 Adapter EDID code
DX3054 Adapter for XELTEK SuperPro 6100N
GX3011 Adapter for XELTEK SuperPro 7500
SN-ADP-VGA adpter for XGecu T56 Programmer support VGA interface HDMI-compatible
BGA169 Adapter For XGecu T56 Programmer
MINI DSG Reader(DQ200+DQ250) for Reading/Writing New VW/AUDI Gearbox Date
WL-TSOP56-E141 Adapter for Wellon VP898 Programmer
Wiggler H-JTAG Parallel download programming debugger ARM9, ARM7 simulator
ALTERA USB Blaster Download Cable FPGA CLPD NIOS JTAG Rev.C
EZP2010 USB Programmer Support 24/25/26/93 EEPROM Flash Bios
ELM327 OBD2 Code Reader Scanner V2.1 Bluetooth Diagnostic Interface For Android
DX0048 Adapter for XELTEK SuperPro 6100N