OBDSTAR X300 DP Plus X300 PAD2 8inch Tablet Full package C Package
OBDSTAR X300 DP Plus X300 PAD2 8inch Tablet (Full package) C Package
Lattice USB download line FPGA CPLD ISP download simulation HW-USBN-2A
Login to Download: Download software
Features:
1. Using Lattice original design, to ensure the use of stable and reliable;
2. Support wide target voltage 1.2V- 5V;
3.USB power supply, no external power supply alone;
4. Supports all LATTICE development environments (LSC ISPVM, LATTICE DEMIOND, LATTICE ISPEVER, and LATTICE PROGRAMMER);
Supports a full range of Lattice FPGAs such as SC (M) / XP / XP2 / ECP2 (M) / ECP3 / ECP5 (G) / MachXO / MachXO2 / MachXO3 / ICE40 series;
6. Support Lattice full range of CPLDs, such as 1000/2000/4000 / ispMACH series;
7. Support JTAG, internal FLASH, SPI FLASH programming mode;
8. No need to install a separate driver, direct support for Diamond / ispLever6.x / 7.x / classic / ispVM various versions of drivers;
9. Has a current-limit input, ESD protection measures to ensure that the download line is complete;
10. Using Lattice official 2 * 5Pin pitch 2.54mm JTAG interface;
11. Support operating system Win2000 / XP, Windows7 / 8/10, Linux and so on
Download Wire Pin Description:
1.SCLK / TCK: connect with chip's SCLK / TCK pin;
2.GND: Downloader and the target board of the public, its internal 2,4-pin connection, in use, need to be a 2,4 feet connected to the target board;
3.MODE / TMS: with the chip's MODE / TMS pin connection;
4.GND: Downloader and the target board of the public, the internal 2,4-pin connection, in the need to use these two in a 2,4 feet connected to the target board;
5. SDI / TDI: SDI / TDI pin connection with the chip;
6.VCC: Used to detect whether the target board connected to the downloader is powered on or not used to power the target board. The official downloader does not have the ability to supply power to the target board. This needs attention;
7.SDO / TDO: SDO / TDO pin connection with the chip;
8.INTI: need to connect INTI pins when downloading and debugging some chips, not every chip needs to be connected;
9.TRST: In some chip download debugging need to connect TRST pin, not every chip needs to connect;
10.ispEN / Enable / PROG: It is necessary to connect the ispEN / Enable / PROG pins when downloading and debugging some chips, and not every chip needs to be connected.
Shipping list:
1.Lattice USB download cable (1)
2.USB 2.0 data cable (1)
3.10P 2.54MM spacing of the cable (1)
4.10P high-quality lattice special fly line (1)
5.2.54mm pitch 2X5 turn 8P standard definition line (1)
No customer reviews for the moment.
OBDSTAR X300 DP Plus X300 PAD2 8inch Tablet (Full package) C Package
DX3013 Adapter for XELTEK SuperPro 6100N
PLCC28 Adapter for PLCC28-DIP24 turn programmer test IC adapter for USB programmer universal
FFC lINE 20CM 32pin + FPC Base Under 32pin
XELTEK SuperPro 610P Universal Programmer with 48 Universal Pin-drivers + 45 Adapters ISP EDID code
SA001A-B2001 Adaptor PLCC20/D20 for XELTEK 610P 611S 500P 600P Programmer
OTS-16-1.27-03 Programmer Adapter SOP8-DIP8 Socket (150mil)
Bluetooth Universal Car Diagnostic 2015.R3 TCS CDP code reader
WL-TSOP56-E141 Adapter for Wellon VP898 Programmer
QFN8 to DIP8(24pin) CNV-QFN8-DIP Programmer Adapter Sockets DFN8 MLF8 6*5
VGA to HDMI line is suitable for RT809H RT809F to solve the problem of printing and brushing in HDMI port
DX3065 Adapter for XELTEK SuperPro 6100N
DX1055 TSOP56 Adapter for XELTEK SuperPro 6000 6100N 7000 7100 5004EGP 5004GP
DX3002 Adapter for XELTEK SuperPro 6000 6100N 7000 7100 5004EGP 5004GP