
DX1045 Adapter for XELTEK SuperPro 6100N
DX1045 Adapter for XELTEK SuperPro 6100N
The use of programmer selftest command,to check if there is problem itself.
Selftest way I:
Step 1 : Input the SELFTEST in the Enter chip printing,click
Step 2 : Click ,look at the hint in the display area,selftest 0 means the test pass;
Step 3 : Install the NO.1 test board and the short port of VGA ISP(short circuit the 4pins and 11pins,12pins and 15pins);
Step 4 : Click ,check the hint in the software,it will hint Selftest 1,test pass;
Step 5 : Install the NO.2 Self Test Board;
Step 6 : Click ,check the hint in the software,it will hint Selftest 2, test pass;
Selftest way II :
Step 1 : When there is no chip on the locking seat,input the type of 25XX in Enter Chip Printing;
Step 2 : Click ,it will hint that there is no chip or the locking seat hasnt been impacted well,which is normal;
If it hints that there may be a pin empty solder;
Attention : In the case of that some users have no test board,as long as the selftest 0 and 25 chip test pass,the machine is normal.
If there is other hints when doing selftest 0,the way to deal with it could be as following:
The problem of connection with computer and the programmer,please step-by examine according to the hint of failure process;
Hardware trouble like pin electric leakage,problems inside the pins,VPP open circuit,GND open circuit,VPP short circuit,VCC short circuit,GND short circuit,VPP protection not shut off,which must be returned to factory to repair.
No customer reviews for the moment.
DX1045 Adapter for XELTEK SuperPro 6100N
DX2044 Adapter for XELTEK SuperPro 6100N
TL866II PLUS Programmer EEPROM Support NAND Flash AVR MCU GAL PIC SPI 25 Universal Adapter Extractor Clip
GX5239-T003-S4 ADAPTER FOR XELTEK SUPERPRO 7500
Bluetooth Universal Car Diagnostic 2015.R3 TCS CDP code reader
XELTEK SuperPro 610P Universal Programmer with 28 Adapter EDID code
Lattice USB download line FPGA CPLD ISP download simulation HW-USBN-2A
EC NPCE288 NPCE388 PCB Board for RT809H Programmer
48 pin Lock clasp Programmer for RT809H TNM5000 XELTEK 610P 611S 6100N BeeProg2
AK90+ Key Programmer Adapter and 10Pin Cable Set
DX3009 Adapter for XELTEK SuperPro 6100N
CX3002 Adapter for XELTEK SuperPro 5000E 5000 5004EGP 5004GP
RT-BGA130-01 POS NAND MCP Adapter For RT809H Programmer
QFN8 to DIP8(22pin) CNV-QFN8-DIP Programmer Adapter Sockets DFN8 MLF8 3*2
DX0064 Adapter for XELTEK SuperPro 6100N